Vacuum Application Device Vacuum Cleaning Dryer

Complicated Solvent Recycling Device Containing Large Quantity of Sludge

It is difficult to recover the solvent with lower discharge type of solvent recovery device if the sludge concentration of waste liquid is high such as waste printing liquid.
If concentration amount is higher than certain part, lower discharge is difficult and it is discharged while concentration is not performed properly. It is in separate vessel input type to make up for this and waste sludge can be made into dry type depending on time

슬러지형 복합용제 재생장치

적용사례 (Application)

Case A

Process sludge of resin element and mixed waste solvent with toluene + IPA + MEK
Process 5ℓ~6ℓ/hr – solvent recycling amount

Case B

Acetic butyl + powder + adhesive element
Process 6ℓ~10ℓ/hr – solvent purification amount

Case C

Waste printing liquid and mixed waste solvent with Toluene + MEK + E.H + IPA
Process 6ℓ~8ℓ/hr – solvent recycling amount

Case D

Toluene+Xylene+Thinner processed oil + powder <- supply status
Auto unmanned operation at vacuum status with input amount of 100ℓ for one time
Notify supply of waste liquid if problem occurs/ recycling device keep vacuum status

Process Enable nighttime unmanned operation
Process 6ℓ~10ℓ/hr – solvent purification amount